# PCA9306 I2C level translator: 1.2 V to 5 V, two bits

> A two-bit bidirectional level translator for I2C and SMBus: supported voltage pairs, on-resistance, enable pin and packages.

Canonical: https://roboticsengineering.in/components/pca9306-i2c-level-translator/ | Published: 2026-11-03 | Updated: 2026-11-03

**The PCA9306 is a dual bidirectional level translator for I2C and SMBus that moves SDA and SCL between voltages from 1.2 V to 5 V with no direction pin.** It is the small, two-line alternative to the eight-channel [TXS0108E](https://roboticsengineering.in/components/txs0108e-level-shifter/), made for I2C sensors on a different voltage from the controller. Figures are from the Texas Instruments PCA9306 datasheet SCPS113O.

## Key specifications

| Channels | 2 (SDA, SCL) |
| --- | --- |
| VREF1 | 1.2–3.3 V |
| VREF2 | 1.8–5.5 V |
| RON | 3.5 Ω |
| Delay | <1.5 ns |
| Packages | SSOP, VSSOP, X2SON (8) |

## What the datasheet promises

| Item | Datasheet value |
| --- | --- |
| Function | 2-bit bidirectional translator for SDA and SCL |
| Voltage pairs | 1.2 V with 1.8, 2.5, 3.3 or 5 V; 1.8 V with 2.5, 3.3 or 5 V; 2.5 V with 3.3 or 5 V; 3.3 V with 5 V |
| Supply ranges | VREF1 1.2 to 3.3 V; VREF2 1.8 to 5.5 V |
| Switch resistance | 3.5 Ω on-state |
| Propagation delay | Under 1.5 ns maximum |
| I/O type | Open-drain I2C ports, 5 V tolerant |
| Enable | EN high connects the sides; EN low isolates them in high impedance |
| Packages | SSOP-8, VSSOP-8 and X2SON-8 |

The datasheet notes the enable pin can also isolate a 400 kHz bus from a 100 kHz bus. Because the I/O is open-drain, each side still needs its own pull-up resistors to its own supply.

## Using it on a robot

- Connect a 5 V I2C sensor to a 3.3 V controller, for example a board built on the [ESP32-C3](https://roboticsengineering.in/components/esp32-c3-soc/), over just two lines.
- Put pull-up resistors on both sides, each to its own voltage.
- Keep the translator close to the voltage boundary on the board.

## Sources and further reading

- [Texas Instruments PCA9306 datasheet (SCPS113O)](https://www.ti.com/lit/ds/symlink/pca9306.pdf) — voltage pairs, supply ranges, resistance, delay, enable and packages above.

Last reviewed: November 2026. Limits are from the Texas Instruments datasheet; breakout boards and modules vary. No price is quoted because it has not been checked.
