# SN65HVD230 CAN transceiver: 3.3 V, 1 Mbps, ISO 11898-2

> A 3.3 V CAN bus transceiver for robot motor and sensor networks: data rate, supply, node count, standby current and ESD.

Canonical: https://roboticsengineering.in/components/sn65hvd230-can-transceiver/ | Published: 2026-11-03 | Updated: 2026-11-03

**The SN65HVD230 is a 3.3 V CAN bus transceiver compatible with ISO 11898-2, designed for data rates up to 1 Mbps and up to 120 nodes on a bus.** It turns the TX and RX logic signals of a CAN controller, such as the one inside an [ESP32-C3](https://roboticsengineering.in/components/esp32-c3-soc/), into the differential CAN bus. The SN65HVD231 and SN65HVD232 share the datasheet. Figures are from the Texas Instruments SN65HVD23x datasheet SLOS346O.

## Key specifications

| Supply | 3.3 V |
| --- | --- |
| Standard | ISO 11898-2 |
| Data rate | up to 1 Mbps |
| Nodes | up to 120 |
| Standby | 370 µA typical (HVD230) |
| Bus ESD | ±16 kV HBM |
| Package | SOIC-8 |

## What the datasheet promises

| Item | Datasheet value |
| --- | --- |
| Supply | Single 3.3 V |
| Standard | Compatible with ISO 11898-2 high-speed CAN physical layer |
| Data rate | Designed for up to 1 Mbps |
| Bus loading | High input impedance allows up to 120 nodes |
| Bus ESD | Exceeds ±16 kV HBM |
| Low-power modes | SN65HVD230: standby mode, 370 µA typical; SN65HVD231: sleep mode, 40 nA typical |
| Edge control | Adjustable driver transition times on the HVD230 and HVD231, to improve emissions |
| Protection | Thermal shutdown, open-circuit fail-safe design, glitch-free power-up and power-down for hot plugging |
| Package | SOIC-8, 4.9 × 3.91 mm |

The transceiver is only the physical layer: it needs a CAN controller to generate the frames, which some microcontrollers have built in. The datasheet notes it is a low-power replacement for the PCA82C250 footprint.

## Using it on a robot

- Link several motor controllers and sensor boards on one twisted pair, with the CAN bus used in robotic control.
- Terminate the bus ends as the datasheet application section describes, and keep the node count within the limit above.
- Use the standby or sleep variants for battery-powered nodes.

## Sources and further reading

- [Texas Instruments SN65HVD230, SN65HVD231, SN65HVD232 datasheet (SLOS346O)](https://www.ti.com/lit/ds/symlink/sn65hvd230.pdf) — supply, standard, data rate, node count, ESD, low-power modes and package above.

Last reviewed: November 2026. Limits are from the Texas Instruments datasheet; breakout boards and modules vary. No price is quoted because it has not been checked.
