# TLC555 CMOS timer: 2 to 15 V, 2 MHz, NE555 pinout

> A low-power CMOS 555 timer for pulses, PWM and delays: supply range, frequency, output drive and how it differs from the NE555.

Canonical: https://roboticsengineering.in/components/tlc555-cmos-timer/ | Published: 2026-11-03 | Updated: 2026-11-03

**The TLC555 is a CMOS 555 timer that runs from 2 V to 15 V, works at frequencies up to 2 MHz and uses about 1 mW at 5 V, with the same pinout as the NE555.** Because its inputs are high impedance it supports smaller timing capacitors, which allows more accurate delays. See the bipolar [NE555](https://roboticsengineering.in/components/ne555-timer/) for comparison. Figures are from the Texas Instruments TLC555 datasheet SLFS043K.

## Key specifications

| Supply | 2–15 V |
| --- | --- |
| Frequency | up to 2 MHz |
| Power | 1 mW typical at 5 V |
| Output | rail-to-rail CMOS |
| Sink/source | 100 mA / 10 mA typical |
| Pinout | same as NE555 |

## What the datasheet promises

| Item | Datasheet value |
| --- | --- |
| Supply voltage | Single supply, 2 V to 15 V |
| Operating frequency | Up to 2 MHz |
| Power consumption | 1 mW typical at VDD = 5 V |
| Output | Rail-to-rail CMOS, compatible with CMOS, TTL and MOS logic |
| Output current | Sink 100 mA typical, source 10 mA typical |
| Thresholds | Trigger about one-third and threshold about two-thirds of the supply; adjustable with the CONT pin |
| Compatibility | Functionally interchangeable with the NE555 and has the same pinout |
| ESD | Exceeds 1000 V per ANSI/ESDA/JEDEC JS-001 |
| Packages | SOIC-8, PDIP-8, SOP-8, TSSOP-14, CDIP-8 and LCCC-20, by grade |

The output can sink more current than it sources, so drive a load such as an LED from the output to the supply rather than to ground, using the 100 mA sink and 10 mA source figures above. Unused inputs must be tied to a logic level to prevent false triggering.

## Using it on a robot

- Generate a PWM signal for a small motor or LED dimmer in astable mode.
- Make a time delay or one-shot pulse using the monostable circuits in the datasheet.
- Run it from a 3.3 V rail, which is inside its 2 V to 15 V supply range.

## Sources and further reading

- [Texas Instruments TLC555 datasheet (SLFS043K)](https://www.ti.com/lit/ds/symlink/tlc555.pdf) — supply, frequency, power, output, thresholds, compatibility and packages above.

Last reviewed: November 2026. Limits are from the Texas Instruments datasheet; breakout boards and modules vary. No price is quoted because it has not been checked.
