# ISO 10218 & ISO/TS 15066 Cobot Safety Standards: SSM Calculator & Force/Pressure Limits

> Calculate ISO/TS 15066 Speed & Separation Monitoring \(SSM\) minimum distances, search biomechanical force/pressure limits \(N & N/cm2\), and audit ISO 10218-2:2025 cells.

Canonical: https://roboticsengineering.in/iso-10218-iso-ts-15066-cobot-safety-guide/ | Published: 2026-11-20 | Updated: 2026-11-20

Buying a force-limited cobot arm does not make a robot cell safe out of the box. Under **ISO 10218-1/2:2025** and **ISO/TS 15066**, integrators must validate the complete cell—including the gripper jaws, sharp workpiece edges, safety laser scanner stopping distances, and controller cybersecurity locks.

ISO 10218-2:2025 & ISO/TS 15066

## Cobot SSM Separation Distance & PFL Biomechanical Limit Tool

Compute minimum protective separation distance (*Sp*) for laser-scanner Speed & Separation Monitoring (SSM), search Annex A quasi-static & transient force/pressure caps, and run the 2025 cell validation checklist.

Human Approach Speed *vh* (mm/s — ISO default 1600)

Robot TCP Speed *vr* (mm/s)

Scanner + PLC Reaction Time *Tr* (ms)

Robot Category-1 Stop Time *Ts* (ms)

Intrusion + Uncertainty Margin *C* + *Zd* + *Zr* (mm)

Min Separation S_p

—

—

Human Travel (*Sh*)

—

During *Tr* + *Ts*

Robot Reaction (*Sr*)

—

At *vr* during *Tr*

Robot Braking (*Ss*)

—

Linear decel &approx; 0.5 · *vr* · *Ts*

Adjust inputs to verify your safety laser scanner warning/protective field radii.

Filter Body Region (ISO/TS 15066 Table A.2 — 1.4 cm² blunt probe baseline)

| Body Region | Quasi-Static Force (N / lbf) | Quasi-Static Pressure (N/cm² / psi) | Transient Force (N) | Transient Pressure (N/cm²) | Bench Risk Note |
| --- | --- | --- | --- | --- | --- |

ISO 10218-2:2025 Cell Audit Readiness

0 / 6 Verified

Tick each item confirmed on the physical cell before CE / OSHA / BIS sign-off

End-effector corners chamfered (≥2 mm radius) and gripper pinch-force capped below hand/finger limit (140 N quasi-static).  Physical force/pressure gauge test run at worst-case clamping point with actual workpiece mounted (not empty wrist).  Safety-rated soft limits & speed clamping verified in Safety PLC / controller safety checksum (PL d / Cat 3 or SIL 2).  Safety laser scanner mute/override logic interlocked with dual-channel E-Stop (ISO 13850) and VFD/drive STO.  OT network segmentation & controller authentication locked per ISO 10218-2:2025 cybersecurity provisions.  Periodic brake-drop and stopping-time drift test interval documented in maintenance SOP.

[Cobot vs Industrial Robot ROI Calculator →](https://roboticsengineering.in/cobot-vs-industrial-robot-roi-calculator/)[Universal Robots Fault Codes (C150/C153/C204) →](https://roboticsengineering.in/universal-robots-cobot-fault-codes-c150-c153-c204/)[All Robotics Calculators →](https://roboticsengineering.in/tools/)

`<iframe src="https://roboticsengineering.in/iso-10218-iso-ts-15066-cobot-safety-guide/?embed=1" width="100%" height="760" style="border:1px solid #d6dfeb;border-radius:12px;" loading="lazy" title="ISO 10218 & ISO/TS 15066 Cobot Safety SSM & PFL Calculator"></iframe>`

**Editorial Note:** Bench-verified engineering reference published by **RoboticsEngineering.in** · An industrial technical publication by [Jaadu Digital](https://jaadudigital.com/).Reviewed by Jignesh S Panchal

### Frequently Asked Bench-Engineering Questions

**How is minimum protective separation distance calculated under ISO/TS 15066?**

ISO/TS 15066 defines Sp = Sh + Sr + Ss + C + Zd + Zr, summing human walking distance during reaction and stopping time, robot travel during controller reaction, robot stopping distance, safety scanner intrusion distance C, and scanner/robot position uncertainties.

**What changed in ISO 10218-1 and ISO 10218-2 (2025 edition)?**

The 2025 revision absorbs ISO/TS 15066 power-and-force limiting (PFL) and speed-and-separation monitoring (SSM) directly into the main standard, tightens OT cybersecurity controls, and requires full cell-level validation including end-effector and workpiece geometry.

**Why does a cobot cell fail ISO/TS 15066 even when the robot arm is force-limited?**

Compliance applies to the complete robot application, not the bare arm. Sharp grippers, rigid heavy payloads, small contact areas, or clamping pinch points against a fixture can exceed biomechanical pressure limits (N/cm2) even at modest joint torque.

**What human approach speed (vh) does ISO/TS 15066 assume by default?**

ISO 13855 and ISO/TS 15066 assume vh = 1600 mm/s for walking approach toward the hazard zone when separation is 500 mm or greater (2000 mm/s for short reach below 500 mm).

## Where Real Cobot Cells Fail ISO/TS 15066 & ISO 10218-2:2025 Audits

- **Workpiece geometry beats bare-arm torque limits:** An arm capped at 150 N can still fail the 190 N/cm² hand pressure cap if it clamps an operator finger against a sharp stamped bracket or narrow pneumatic jaw.
- **Quasi-static clamping at fixtures:** Transient impact caps are roughly double quasi-static clamping limits. Always eliminate pinch zones within 500 mm of conveyor rails and CNC vise doors.
- **Drive STO & safety interlock faults:** When pairing safety laser scanners with external conveyors and VFD Safe Torque Off (STO), diagnose drive trip codes quickly using our sister [VFD Fault Code Troubleshooter](https://engitech.in/vfd-fault-code-troubleshooter/) on EngiTech.in.

Evaluating payback or troubleshooting protective stops on the floor? Run our [Cobot vs 6-Axis Robot ROI Calculator](https://roboticsengineering.in/cobot-vs-industrial-robot-roi-calculator/) or check [Universal Robots C150–C204 Fault Codes](https://roboticsengineering.in/universal-robots-cobot-fault-codes-c150-c153-c204/).
