# LiPo, Li-Ion & LiFePO4 Robot Battery Voltage-to-SOC Chart \(1S–12S\) & AWG Table

> 1S to 12S LiPo, Li-Ion 18650, and LiFePO4 state-of-charge voltage chart, silicone wire AWG ampacity table, and live battery runtime & C-rate calculator.

Canonical: https://roboticsengineering.in/lipo-li-ion-robot-battery-voltage-soc-chart/ | Published: 2026-11-20 | Updated: 2026-11-20

1S–12S Chemistry · Battery & AWG Hub

## LiPo, Li-Ion & LiFePO4 Robot Battery Voltage-to-SOC Chart (1S–12S) & AWG Table

Interactive battery runtime, C-rate peak current, and wire-gauge sizing calculator paired with 1S–12S LiPo/Li-Ion/LiFePO4 SOC and silicone AWG tables.

SAFE — Within C-Rating

### Live Battery Runtime, C-Rate & Wire Gauge Calculator

Battery Chemistry

Series Cell Count (1S–12S)

Pack Capacity (mAh)

Continuous C-Rating

Average Robot Current (A)

Peak Stall Current (A) & Reserve (%)

Voltage (Full / Nom / Cut)

16.8 / 14.8 / 13.2 V

Pack Energy & Runtime

74.0 Wh · 20.0 min

Max Continuous Output

125 A (Peak Ok)

Min Silicone Wire Gauge

12 AWG (3.31 mm²)

### 1S–12S Robot Battery Voltage-to-SOC Chart

| Series | 100% Full | 80% | 50% Storage | 20% Alarm | 0% Load Cutoff |
| --- | --- | --- | --- | --- | --- |
| **1S** |  |  |  |  |  |
| **2S** |  |  |  |  |  |
| **3S** |  |  |  |  |  |
| **4S** |  |  |  |  |  |
| **5S** |  |  |  |  |  |
| **6S** |  |  |  |  |  |
| **7S** |  |  |  |  |  |
| **8S** |  |  |  |  |  |
| **10S** |  |  |  |  |  |
| **12S** |  |  |  |  |  |

### Silicone Wire AWG & Metric mm² Ampacity Table

| AWG Size | Cross-Section | Copper Dia (mm / in) | Continuous | 10s Burst | Resistance | Typical Robot Application |
| --- | --- | --- | --- | --- | --- | --- |
| **22 AWG** | 0.326 mm² | 0.64 mm (0.025 in) | 5 A | 8 A | 52.9 mΩ/m (16.1 mΩ/ft) | Logic / Sensor / Servo Signal |
| **18 AWG** | 0.823 mm² | 1.02 mm (0.040 in) | 12 A | 18 A | 21.0 mΩ/m (6.4 mΩ/ft) | Small Stepper / 1A–8A Sub-Rail |
| **16 AWG** | 1.31 mm² | 1.29 mm (0.051 in) | 18 A | 28 A | 13.2 mΩ/m (4.0 mΩ/ft) | Rover Logic + Light Actuator Bus |
| **14 AWG** | 2.08 mm² | 1.63 mm (0.064 in) | 25 A | 40 A | 8.28 mΩ/m (2.5 mΩ/ft) | XT30 / Medium 15–25A Drive Bus |
| **12 AWG** | 3.31 mm² | 2.05 mm (0.081 in) | 35–45 A | 65 A | 5.21 mΩ/m (1.6 mΩ/ft) | XT60 Main Pack Lead (3S–6S) |
| **10 AWG** | 5.26 mm² | 2.59 mm (0.102 in) | 55–65 A | 95 A | 3.28 mΩ/m (1.0 mΩ/ft) | XT90 Combat / AMR Main Bus |
| **8 AWG** | 8.37 mm² | 3.26 mm (0.128 in) | 80–90 A | 140 A | 2.06 mΩ/m (0.63 mΩ/ft) | AS150 / Heavy 48V AMR Bus |
| **6 AWG** | 13.3 mm² | 4.12 mm (0.162 in) | 110–125 A | 200 A | 1.30 mΩ/m (0.40 mΩ/ft) | Forklift / High-Power Inverter Bus |
| **4 AWG** | 21.2 mm² | 5.19 mm (0.204 in) | 150–170 A | 260 A | 0.81 mΩ/m (0.25 mΩ/ft) | Industrial AGV Main Battery Feed |

`<iframe src="https://roboticsengineering.in/lipo-li-ion-robot-battery-voltage-soc-chart/" width="100%" height="780" style="border:1px solid #d6dfeb;border-radius:12px;" loading="lazy" title="LiPo, Li-Ion & LiFePO4 Robot Battery Voltage-to-SOC Chart (1S–12S) & AWG Table"></iframe>`

**Grow Your Robotics / Automation Brand Online with Jaadu Digital** Technical SEO, B2B lead generation, and engineering content systems built for robotics integrators and OEMs.

[Explore Jaadu Digital →](https://jaadudigital.com/)

### Frequently Asked Engineering Questions

**What is the safe minimum discharge voltage for a LiPo robot battery under load?**

Avoid discharging LiPo or Li-Ion cells below 3.3V per cell under load (3.5V resting) to prevent irreversible capacity loss; LiFePO4 packs can safely run down to 2.8V per cell under load.

**How do I calculate continuous amps from mAh and C-rating?**

Multiply capacity in Ah (mAh / 1000) by the continuous C-rating. For example, a 5000 mAh (5 Ah) 25C pack supports 5 x 25 = 125 A continuous, though keeping load under 70% improves cycle life.

**What silicone wire AWG should I use for 30A, 60A, or 100A robot power buses?**

Use 12 AWG (3.3 mm²) for up to 35-45A continuous, 10 AWG (5.3 mm²) for 55-65A, and 8 AWG (8.4 mm²) or 6 AWG (13.3 mm²) for 80-120A main motor buses with XT60/XT90/Anderson connectors.

**DC Silicone Harness & Voltage Drop Check:** A 6S LiPo pack sags fast enough under motor stall without losing another 1.5 V in undersized XT60 or Anderson leads. Before crimping battery leads, convert AWG to mm² and verify DC loop voltage drop at peak discharge amps on the [EngiTech AWG to mm² Cable Size & Voltage Drop Calculator](https://engitech.in/awg-to-mm2-cable-size-voltage-drop-calculator/).
