Industrial Robot Cycle Time, Pick-and-Place PPM & Joint Velocity Calculator

Cycle Time · PPM · DH Kinematics Hub

Industrial Robot Cycle Time, Pick-and-Place PPM & Joint Velocity Calculator

Live Pick-and-Place Cycle Time (s), Parts Per Minute (PPM), PPH, Trapezoidal vs S-Curve motion profile timing, and DH kinematics reference.

36.4 PPM · 2,182 PPH

Interactive Pick-and-Place Cycle Time, PPM & Joint Velocity Calculator

Total Cycle Time
1.65 s
Throughput (PPM / PPH)
36.4 PPM · 2,182 PPH
Peak Accel (Metric / Imp)
12.0 m/s² (39.4 ft/s²)
Req. J1 Angular Speed
158.7 °/s (2.77 rad/s)

Motion breakdown: 1.33 s (4x vertical + 2x transfer moves) + 0.32 s gripper/PLC dwell.

Robot Architecture & DH Kinematics Benchmark Table

Robot Kinematics ClassTypical Reach (mm / in)Repeatability (mm / in)Typical Pick RateDenavit-Hartenberg (DH) Structure
6-Axis Articulated (e.g. FANUC M-10iD / ABB IRB 1600)1,400–2,000 mm (55–79 in)±0.02–0.05 mm (±0.0008–0.002 in)18–35 PPM6 Revolute (RRRRRR) · Spherical wrist J4–J6
4-Axis SCARA (e.g. Epson LS/G-Series)400–1,000 mm (15.7–39.4 in)±0.01–0.025 mm (±0.0004–0.001 in)60–110 PPMRRPR (θ1, θ2, Z-quill d3, θ4)
3/4-Axis Delta Parallel (e.g. ABB FlexPicker)800–1,600 mm (31.5–63 in)±0.05–0.10 mm (±0.002–0.004 in)100–150+ PPM3x Closed Kinematic Parallelogram Arms + Zθ
6-Axis Cobot (e.g. UR5e / UR10e)850–1,300 mm (33.5–51.2 in)±0.03–0.05 mm (±0.0012–0.002 in)8–18 PPM6 Revolute Offset-Wrist (ISO/TS 15066 speed cap)
3-Axis Cartesian Gantry500–4,000 mm (19.7–157 in)±0.02–0.08 mm (±0.0008–0.003 in)25–55 PPMPPP Orthogonal Linear Rails (d1, d2, d3)
Grow Your Robotics / Automation Brand Online with Jaadu Digital Technical SEO, B2B lead generation, and engineering content systems built for robotics integrators and OEMs.
Explore Jaadu Digital →

Frequently Asked Engineering Questions

Why is real pick-and-place cycle time slower than catalog robot max speed?

Short transfers (200-400 mm) are acceleration-limited, not top-speed limited, and gripper actuation (60-150 ms), PLC handshake, and S-curve jerk smoothing add 25-45% to total cycle time.

When should I choose S-Curve over Trapezoidal motion profiles?

Use jerk-limited S-Curve profiles when handling liquids, vacuum-gripped thin sheets, or tall parts where infinite-jerk trapezoidal stops excite structural arm vibration.

How do Denavit-Hartenberg (DH) parameters relate to cycle time?

DH link lengths (a_i, d_i) determine the Jacobian mapping between joint velocities (deg/s) and Cartesian TCP speed (mm/s); moving near wrist singularities forces excessive J4/J6 velocity.