Verify whether your gripper, workpiece, center-of-gravity offsets, and peak cycle accelerations stay safely inside your robot wrist torque and mass-moment-of-inertia envelope.
Robot Payload, Wrist Torque & Inertia Calculator
Frequently Asked Engineering Questions
Why can a 10 kg rated robot overload with only a 6 kg gripper and part?
Catalog payload ratings assume a short CoG offset (often 80–100 mm). Long cantilevered tooling or high linear/angular accelerations exceed the rated wrist torque (Nm) and inertia (kg·m²) before total mass hits 10 kg.
How is effective mass moment of inertia J calculated at the flange?
By the parallel-axis theorem: J = I_cm + m * r², where I_cm is the load inertia about its own center of mass, m is total flange mass, and r is the 3D CoG distance from the wrist axis.
What safety factor should I use for dynamic robot payload sizing?
Use 1.25x for steady pick-and-place, 1.4x for high-speed palletizing or E-stop deceleration, and 1.5x+ when handling eccentric castings or vacuum-gripped sheet metal.
Does entering wrong payload data affect robot accuracy and brake wear?
Yes. Wrong payload mass or CoG causes overshoot, false collision trips, premature harmonic-drive wear, and longer stopping distances during Category 1 safety stops.
How do I reduce wrist torque without buying a larger robot?
Move heavy solenoid valves and vacuum generators off the EOAT onto the upper arm, shorten flange standoffs, and align the heaviest part dimension along the J6 rotation axis.