Buying guides
Barcode Readers for Automation Lines: What to Check
What to check when choosing a barcode reader for an automation line: read distance, symbologies, glare, triggering and real-label trials.
Learn
Plain-English tutorials that build on each other: a pin, a sensor, a control loop, a node. Written for people who have to make the robot move.
Everything here is written to be used on a bench, not admired on a slide. Each guide answers one question a builder actually hits: why the servo browns out the board, why the sensor reading jumps, which board to buy with ₹3,000, what an examiner expects in the report. Prices are planning ranges in rupees, and every build sheet says what it has not tested. These robotics tutorials are written to be used on a bench, and each one answers a single question builders hit.
These guides cover the industrial side: what a robot cell costs in India, what a safety audit has to test, and what a maintenance contract or insurance policy actually covers.
Every article is reviewed against manufacturer datasheets and current Indian listings, then dated. Nothing on this site claims a physical build test unless the article says so and shows the evidence. If a guide conflicts with a datasheet or a safety standard, the datasheet wins — see the editorial standard for the full process.
If you have never powered a motor, read the power guide and the battery guide before buying a driver. If you have a project deadline, read the final-year project list and the report format together; the build is only half the marks. If you are choosing a branch specialisation, start with the careers guide and then build one project from the library so the interview has something concrete to discuss.
Building a machine for a factory rather than a bench? The industrial robotics guides apply the same engineering discipline at plant scale: specifying the robot, commissioning the cell and proving it is safe.
No. The site has a guide to learning the control logic and code without buying parts first, so you can start with a simulator or an emulator and buy components once you know what the build needs.
Most beginner projects here use an Arduino Uno or an Arduino Nano, because the parts are cheap and widely documented in India. Move to an ESP32 when you need WiFi or faster processing.
Each project page lists its parts with rupee prices, so you can cost a build before ordering anything.
The guides set out a parts list, the wiring and a test that proves the build works, which is the evidence most submissions are marked on. Check your department requirements before you rely on them.
Buying guides
What to check when choosing a barcode reader for an automation line: read distance, symbologies, glare, triggering and real-label trials.
Buying guides
Belt drive or lead screw for a robot axis, with worked travel-per-step numbers and notes on load, backlash and upkeep.
Buying guides
How to match steppers, GT2 belts, pulleys and drivers for a pen plotter, with a steps-per-mm worked example.
Buying guides
How to size a UPS for a robot controller, with a worked watts, VA and runtime example and checks on battery, waveform…
Buying guides
A checklist for buying a ROS-ready robot base: drive type, encoders, compute link, sensors, battery and docs.
Tutorials
Run a motor step test, read the 63.2 percent point and calculate the time constant, with Arduino logging code.
Tutorials
How to read a 5/2 pneumatic valve symbol, what each port number does, and how to wire a double-acting cylinder to it.
Buying guides
What to check on a buck converter module for robots: input range, current headroom, efficiency, ripple, heat and bench testing.
Buying guides
Cells in series add voltage and cells in parallel add capacity, and a robot battery pack usually needs both.
Tutorials
Calculate camera field of view and pixel footprint from sensor size, focal length and distance, with a worked example.