ESP32-C3: RISC-V 160 MHz, Wi-Fi, Bluetooth 5 LE, 5 µA deep sleep

The single-core RISC-V Espressif ESP32-C3 chip for small battery robots and sensors: CPU, memory, GPIOs, peripherals and sleep current.

By Jignesh Panchal · Editorial & verification standards

  • TypeBoards
  • LevelBeginner
  • ReviewedNov 2026

The ESP32-C3 is a single-core 32-bit RISC-V microcontroller running up to 160 MHz with 2.4 GHz Wi-Fi, Bluetooth 5 (LE), 400 KB of SRAM and a deep-sleep consumption of 5 µA. It is the small, low-cost chip in the family, with fewer pins than the ESP32-S3. Figures are from the Espressif ESP32-C3 Series datasheet, version 2.4.

Key specifications

CPURISC-V single-core, up to 160 MHz
WirelessWi-Fi 802.11b/g/n, Bluetooth 5 (LE)
SRAM400 KB
GPIOs22 (16 on some variants)
ADCtwo 12-bit, up to 6 channels
Deep sleep5 µA

What the datasheet promises

ItemDatasheet value
Processor32-bit RISC-V single core, up to 160 MHz; 483.27 CoreMark
Wireless2.4 GHz Wi-Fi (802.11b/g/n) and Bluetooth 5 (LE)
Memory384 KB ROM, 400 KB SRAM (16 KB for cache), 8 KB RTC SRAM; optional in-package flash up to 8 MB
GPIOs22 on the standard chip; 16 on the ESP32-C3FH4X and FH4AZ; 3 strapping pins
Serial and busTwo UARTs, three SPI, I2C, I2S, TWAI (CAN 2.0) controller, full-speed USB Serial/JTAG
PWM and timingLED PWM up to 6 channels; remote-control peripheral; two 54-bit timers
AnalogTwo 12-bit SAR ADCs, up to 6 channels; temperature sensor
PowerDeep-sleep consumption 5 µA, with RTC memory kept powered
SecuritySecure boot, flash encryption, AES, SHA, RSA and a random number generator
PackageQFN32, 5 × 5 mm

With 22 GPIOs and six ADC channels the C3 suits a simple robot controller or sensor node rather than a camera robot; for that, use the S3. Check the board’s documentation for which pins are broken out.

Using it on a robot

  • Use it for battery-powered sensors that wake, read and sleep, using the 5 µA deep-sleep mode.
  • Drive a small motor driver with the LED PWM channels, or a CAN transceiver from the TWAI controller.
  • Keep the three strapping pins in mind when you wire the first pins.
  • For a dual-core chip with more pins, use the ESP32-S3.

Sources and further reading

Last reviewed: November 2026. Limits are from the Espressif datasheet for the chip; development boards add their own regulator, USB chip and pin choices. No price is quoted because it has not been checked.

Where to buy in India

These open a store search. Compare seller, price and reviews before you order.

Free: the final-year project pack

A shortlist with BOMs, a report outline that matches the usual chapter scheme, a costing sheet and 40 viva questions. Built for the February–April submission season.

The Build Note

One short email when something is worth your bench time.

A new build sheet, a part price that moved, or a mistake worth avoiding. No daily drip, no recycled news.

One short email when a build or a price is worth your time. Unsubscribe in one click.