ESP32-S3: dual-core 240 MHz, Wi-Fi, Bluetooth 5 LE, 45 GPIOs

The Espressif ESP32-S3 chip behind many camera and display robot boards: cores, memory, peripherals and wireless, from the datasheet.

By Jignesh Panchal · Editorial & verification standards

  • TypeBoards
  • LevelIntermediate
  • ReviewedNov 2026

The ESP32-S3 is a dual-core Xtensa LX7 microcontroller running up to 240 MHz with 2.4 GHz Wi-Fi, Bluetooth 5 (LE), 512 KB of SRAM and 45 programmable GPIOs. It adds a camera interface, an LCD interface and full-speed USB OTG over the older chip on the ESP32 DevKit V1. Figures are from the Espressif ESP32-S3 Series datasheet, version 2.2.

Key specifications

CPUdual-core Xtensa LX7, up to 240 MHz
WirelessWi-Fi 802.11b/g/n, Bluetooth 5 (LE)
SRAM512 KB
GPIOs45
USBfull-speed OTG
Camera8–16-bit DVP interface
ADCtwo 12-bit, up to 20 channels

What the datasheet promises

ItemDatasheet value
ProcessorDual-core 32-bit Xtensa LX7, up to 240 MHz; 1329.92 CoreMark with both cores
Wireless2.4 GHz Wi-Fi (IEEE 802.11b/g/n) and Bluetooth 5 (LE)
Memory384 KB ROM, 512 KB SRAM, 16 KB RTC SRAM; optional in-package flash and PSRAM
GPIOs45 programmable, 4 of them strapping pins; some are used by in-package flash or PSRAM
Serial and busThree UARTs, two I2C, two I2S, SPI ports, TWAI (CAN 2.0) controller, SD/MMC host with 2 slots
USBFull-speed USB OTG and a USB Serial/JTAG controller
Display and cameraLCD interface and an 8 to 16-bit DVP camera interface
Motor and timingLED PWM up to 8 channels, two MCPWM, RMT, pulse counter
AnalogTwo 12-bit SAR ADCs, up to 20 channels; 14 touch-sensing pins; temperature sensor
PackageQFN56, 7 × 7 mm

The chip is sold in variants with different in-package flash and PSRAM, listed in the datasheet’s ordering table. Development boards choose their own variant and pin layout, so check the board’s documentation for which GPIOs are free.

Using it on a robot

  • Use it where a robot needs a camera and Wi-Fi together, or a display, with USB handled by the chip itself.
  • Use the MCPWM and LED PWM channels for motor drivers, and the TWAI controller for a CAN bus.
  • Avoid the strapping pins for loads that would pull them at reset, and the pins used by in-package memory.
  • For a smaller, cheaper chip with Wi-Fi and Bluetooth LE, see the ESP32-C3.

Sources and further reading

Last reviewed: November 2026. Limits are from the Espressif datasheet for the chip; development boards add their own regulator, USB chip and pin choices. No price is quoted because it has not been checked.

Where to buy in India

These open a store search. Compare seller, price and reviews before you order.

Free: the final-year project pack

A shortlist with BOMs, a report outline that matches the usual chapter scheme, a costing sheet and 40 viva questions. Built for the February–April submission season.

The Build Note

One short email when something is worth your bench time.

A new build sheet, a part price that moved, or a mistake worth avoiding. No daily drip, no recycled news.

One short email when a build or a price is worth your time. Unsubscribe in one click.