DRV8847 dual H-bridge: 2.7 to 18 V, 1 A per bridge

A dual H-bridge for two small brushed motors or one stepper, with current regulation and several control modes: supply, current and protection.

By Jignesh Panchal · Sources, testing and AI policy

  • TypeMotor drivers
  • LevelIntermediate
  • ReviewedNov 2026

The DRV8847 is a dual H-bridge driver that works from 2.7 to 18 V and supplies 1 A RMS per bridge, or 2 A RMS with the bridges in parallel and proper heat sinking, enough for two small brushed motors or one bipolar stepper. It regulates current with a fixed off time and has several control interfaces. It sits between the DRV8833 and the larger DRV8874. Figures are from the Texas Instruments DRV8847 datasheet SLVSE65C.

Key specifications

Supply2.7–18 V
Current1 A RMS per bridge (2 A parallel)
RDS(on)1000 mΩ HS + LS
Logic1.8, 3.3, 5 V
Sleep1.7 µA at 12 V
PackagesTSSOP, HTSSOP, WQFN (16)

What the datasheet promises

ItemDatasheet value
Supply voltage2.7 to 18 V
Current per bridge1 A RMS at 25 °C; 2 A RMS in parallel mode with proper heat sinking
On-resistance1000 mΩ high side plus low side at 25 °C (VM above 5 V)
LoadsOne or two brushed DC motors, one bipolar stepper, solenoids
Control interfaces4-pin, 2-pin, parallel bridge and independent bridge
Current regulationFixed 20 µs off time, with a torque scalar to reduce current to 50 percent
Logic inputs1.8 V, 3.3 V and 5 V
Sleep current1.7 µA at VM = 12 V, 25 °C
ProtectionUndervoltage lockout, overcurrent on each FET, short circuit, open-load detection and overtemperature, with an nFAULT pin
Variants and packagesDRV8847S has I2C diagnostics; TSSOP-16, HTSSOP-16 and WQFN-16

At 1000 mΩ the driver dissipates more than the DRV8874 at the same current, so check the thermal limits for your supply and duty cycle in the datasheet.

Using it on a robot

  • Drive two small gear motors, or one bipolar stepper whose winding current is within the limit above.
  • Use the nFAULT output so the controller learns about a stalled or shorted motor.
  • Choose the control interface on the datasheet table before you wire it, since the logic differs between modes.

Sources and further reading

Last reviewed: November 2026. Limits are from the Texas Instruments datasheet; breakout boards and modules vary. No price is quoted because it has not been checked.

Where to buy in India

These open a store search. Compare seller, price and reviews before you order.

Free: the final-year project pack

A shortlist with BOMs, a report outline that matches the usual chapter scheme, a costing sheet and 40 viva questions. Built for the February–April submission season.

The Build Note

One short email when something is worth your bench time.

A new build sheet, a part price that moved, or a mistake worth avoiding. No daily drip, no recycled news.

One short email when a build or a price is worth your time. Unsubscribe in one click.