PCA9306 I2C level translator: 1.2 V to 5 V, two bits

A two-bit bidirectional level translator for I2C and SMBus: supported voltage pairs, on-resistance, enable pin and packages.

By Jignesh S Panchal · Editorial & verification standards

  • TypeBoards
  • LevelBeginner
  • ReviewedNov 2026

The PCA9306 is a dual bidirectional level translator for I2C and SMBus that moves SDA and SCL between voltages from 1.2 V to 5 V with no direction pin. It is the small, two-line alternative to the eight-channel TXS0108E, made for I2C sensors on a different voltage from the controller. Figures are from the Texas Instruments PCA9306 datasheet SCPS113O.

Key specifications

Channels2 (SDA, SCL)
VREF11.2–3.3 V
VREF21.8–5.5 V
RON3.5 Ω
Delay<1.5 ns
PackagesSSOP, VSSOP, X2SON (8)

What the datasheet promises

ItemDatasheet value
Function2-bit bidirectional translator for SDA and SCL
Voltage pairs1.2 V with 1.8, 2.5, 3.3 or 5 V; 1.8 V with 2.5, 3.3 or 5 V; 2.5 V with 3.3 or 5 V; 3.3 V with 5 V
Supply rangesVREF1 1.2 to 3.3 V; VREF2 1.8 to 5.5 V
Switch resistance3.5 Ω on-state
Propagation delayUnder 1.5 ns maximum
I/O typeOpen-drain I2C ports, 5 V tolerant
EnableEN high connects the sides; EN low isolates them in high impedance
PackagesSSOP-8, VSSOP-8 and X2SON-8

The datasheet notes the enable pin can also isolate a 400 kHz bus from a 100 kHz bus. Because the I/O is open-drain, each side still needs its own pull-up resistors to its own supply.

Using it on a robot

  • Connect a 5 V I2C sensor to a 3.3 V controller, for example a board built on the ESP32-C3, over just two lines.
  • Put pull-up resistors on both sides, each to its own voltage.
  • Keep the translator close to the voltage boundary on the board.

Sources and further reading

Last reviewed: November 2026. Limits are from the Texas Instruments datasheet; breakout boards and modules vary. No price is quoted because it has not been checked.

Where to buy in India

These open a store search. Compare seller, price and reviews before you order.

Free: the final-year project pack

A shortlist with BOMs, a report outline that matches the usual chapter scheme, a costing sheet and 40 viva questions. Built for the February–April submission season.

The Build Note

One short email when something is worth your bench time.

A new build sheet, a part price that moved, or a mistake worth avoiding. No daily drip, no recycled news.

One short email when a build or a price is worth your time. Unsubscribe in one click.