RP2040: dual Cortex-M0+ at 133 MHz, 264 kB SRAM, 8 PIO state machines

The Raspberry Pi RP2040 chip behind the Pico: cores, memory, GPIO, PWM, ADC, USB and programmable I/O, from the datasheet.

By Jignesh S Panchal · Editorial & verification standards

  • TypeBoards
  • LevelBeginner
  • ReviewedNov 2026

The RP2040 is a dual-core Arm Cortex-M0+ microcontroller running at 133 MHz with 264 kB of on-chip SRAM, 30 GPIO pins, 16 PWM channels and 8 programmable I/O (PIO) state machines. It is the chip on the Raspberry Pi Pico family, including the Pico W. Figures are from the Raspberry Pi RP2040 datasheet.

Key specifications

CPUdual Cortex-M0+, 133 MHz
SRAM264 kB
GPIO30 (4 analogue inputs)
PWM16 channels
ADC12-bit, 500 ksps, 4 channels
USB1.1 host and device
PIO8 state machines

What the datasheet promises

ItemDatasheet value
ProcessorDual Arm Cortex-M0+, up to 133 MHz (or 200 MHz at 1.15 V, see the datasheet)
Memory264 kB of on-chip SRAM in six banks; up to 16 MB of off-chip flash over QSPI
GPIO30 multifunction pins, 4 of which can be analogue inputs
Serial buses2 UARTs, 2 SPI controllers, 2 I2C controllers
PWM16 channels
ADC12-bit, 500 ksps, 4 channels plus an internal temperature sensor
USBUSB 1.1 controller and PHY, host and device
Programmable I/O8 PIO state machines for custom interfaces
Other blocksDMA controller, interpolator, integer divider, 2 PLLs, on-chip programmable LDO for the core voltage
Process40 nm

The chip has no radio and no on-chip flash: a board adds the flash chip and, on the Pico W, the wireless module. The PIO state machines are what set it apart; they let you build interfaces such as extra UARTs, LED strip drivers or encoder readers that run beside the main code.

Using it on a robot

  • Use the 16 PWM channels for motor drivers and servos from one chip.
  • Use a PIO state machine to read a quadrature encoder or drive an addressable LED strip without using CPU time.
  • Check the I/O voltage in the datasheet before connecting 5 V sensors, and use a level shifter such as the TXS0108E where needed.
  • For built-in Wi-Fi and Bluetooth, use an ESP32 board such as the ESP32-C3.

Sources and further reading

Last reviewed: November 2026. Limits are from the Raspberry Pi datasheet for the chip; boards add their own flash, regulator and pin choices. No price is quoted because it has not been checked.

Where to buy in India

These open a store search. Compare seller, price and reviews before you order.

Free: the final-year project pack

A shortlist with BOMs, a report outline that matches the usual chapter scheme, a costing sheet and 40 viva questions. Built for the February–April submission season.

The Build Note

One short email when something is worth your bench time.

A new build sheet, a part price that moved, or a mistake worth avoiding. No daily drip, no recycled news.

One short email when a build or a price is worth your time. Unsubscribe in one click.