Tutorials
ESP32 deep sleep: wake sources and battery life
How ESP32 deep sleep works: what it turns off, the ways to wake the board, what memory survives, and a worked battery-life…
Executive Author Profile · 323 guides

Jignesh S Panchal is the Founder of Jaadu Digital and Musafir Infotech, and the Publisher of Robotics Engineering (roboticsengineering.in). With 9+ years of hands-on experience in industrial marketing, B2B engineering systems, and manufacturing & robotics automation workflows in India, he oversees editorial direction, rupee BOM verification, and standards-reviewed build guides.
Tutorials
How ESP32 deep sleep works: what it turns off, the ways to wake the board, what memory survives, and a worked battery-life…
Tutorials
Compare the HC-SR04 ultrasonic sensor with the VL53L0X and VL53L1X time-of-flight sensors, and learn how to wire several time-of-flight sensors on one…
Tutorials
How to build a line follower with Arduino: choosing sensors, placing them, a proportional-steering starter sketch and a step-by-step test plan.
Tutorials
Compare moving average, exponential and median filters on the same readings, with the arithmetic worked by hand, and learn which one suits…
Tutorials
Stop your Arduino robot freezing: replace delay() with millis() timing, handle rollover correctly, and organise behaviour as a simple state machine.
Tutorials
Robot gearbox failure symptoms read in order: creeping backlash, reversal-only error, post-collision ratcheting, heat and grease life, encoder false positives.
Tutorials
Measure gearbox backlash with a dial indicator, backdrive or servo trace, then convert the reading to arcminutes and millimetres at the tool…
Careers
Which parts of a B.Tech mechanical degree carry into robotics, which Indian job advertisement lists your branch, and how to choose between…
Tutorials
Harmonic drive vs planetary gearbox on lost motion, stiffness, heat and L10 life, with the catalogue numbers that decide which one fits…
Tutorials
A robot gearhead is picked in a fixed order: lost motion at the tool tip, then rated and peak torque with the…